How to Hem Pants Without Sewing: 6 Effective Ways of Doing It

0
5
how to hem pants without sewing

If you have a pair of pants that need to be hemmed, you might wonder how to hem pants without sewing. There are several options, including:

  • Tape,
  • Slip Stitch,
  • Running Stitch,
  • Fray Block, and
  • Fray Check.

However, the process can be tricky, especially if you’ve never hemmed pants before.

You can also learn about Serger sewing machine and its functions here.

how to hem pants without sewing

How to Hem Pants Without Sewing

Tape

There are many ways to hem pants without sewing, but one of the easiest is with tape. Tape is a great option because it doesn’t require a sewing machine or the need for a special hemming tool.

The steps for applying tape to pants vary depending on the manufacturer, but most of them involve applying it to a garment inside out. To begin:

  1. Turn the garment inside out and measure the length of the hem.
  2. Then, pin the length of the tape and cut it to the desired length.
  3. You must also iron the tape to make sure it sticks to the fabric.
  4. After completing the application, let the garment cool and turn it right side out.

how to hem pants without sewing

Tape is available in a wide variety of widths, colors, and lengths. You can find it in most craft stores. It comes in three different thicknesses: 3/8″ wide, 1/2″ wide, and 5-inch wide. It’s also available in several colors and is especially good for dark fabrics.

Slip Stitch

If you want a simple and fast hem, you can try the slip stitch method. This method is performed by hand and doesn’t require much extra fabric or practice. To perform this method, you will need to fold the bottom edge of the pants up and refold the hem, with the right sides of the fabrics facing each other.

hem pants without sewing

If you are using the Brave browser, you can drop a tip for us. We are verified creator. Thank you!

Before starting the process, check the label of your pants to determine whether they are made of a non-stretch fabric or not. If you’re not sure, it’s best to prewash the pants before starting. This will help avoid any fraying.

Running Stitch

The most common way of hemming pants without sewing is to use a running stitch. This type of stitch is also known as a blind hem stitch, and it creates a finish similar to a hand-sewn hem.

Despite the name, no-sew hems are not permanent and are not a good solution if you want a clean, professional look. However, hem tapes can be purchased for a more temporary solution. These tapes can be ironed on or removed.

To create a smooth hem, start by grabbing a few threads at the front of the garment and stitching from there. Make sure to use a needle that does not pierce the right side of the garment. When you are finished, try the hemline on to see if it’s even.

 

If the folds are large, you may need to trim the raw edge.

Fray Block or Fray Check

One method for hemming pants without sewing is to use a product called fray block. This product has a tube that contains a liquid that sticks to the fabric. Once the liquid has been applied, it stiffens it up.

The amount of stiffness needed depends on the type of fabric you are using. This product is not recommended for use on all fabrics, so it is best to try it on a scrap first.

Another method is to use fabric adhesive. This type of glue hardens up the raw thread edges and prevents them from fraying. However, cutting the legs too close to the seam can cause them to look unflattering or uncomfortably tucked-in.

If you choose to use this method, make sure to take measurements at the same level as the floor, so that you don’t cut off too much fabric. Fraying jeans is a personal choice, so be sure to consider the appearance of the fraying before doing so.

Pins

Using pins is a quick and easy way to hem pants without sewing. You can use a pair of pins in either a straight or zigzag fashion. The length of the pins should be approximately 2″ longer than the width of the pants’ fold line.

Before hemming your pants, make sure they are clean and dry. This will prevent them from shrinking. For jeans and cotton fabric, this step is especially important. The first step is to turn up the cuff of the pant and measure the desired length.

Measure and mark the desired length by placing a pin on the bottom fold. You will then transfer these markings to the inside of the pants.

Hand Sewing

Hemming your pants without sewing may seem like a difficult task, but it is actually very simple and quick. If you have the correct tools and techniques, you can easily hem your pants with a little effort.

Although this technique is not suitable for all fabrics, it can be a quick fix for most people. To achieve a professional hem, you will need to have sewing skills.

how to hem pants without sewing, stitch

First, fold the bottom edge of the fabric 1/4 inch to the wrong side. Then, fold the bottom edge of the fabric one-fourth inch below the desired finished hem width. This will give you a hem width of about an inch.

You can then fold up the bottom edge of the pants by one-fourth inch and press it up.

Drive more traffic to your online store using performance based marketing.